1. Home
  2. Login
  3. View Basket
  4. Checkout

New Product

New Product

Stenner Pressure Guides Now Available

Gerrymet are now able to supply pressure guides for Stenner bandsaw machines.

There are two different sizes:

100 x 40 x 10mm will fit the following models:
ST80, ST100R, ST100, MHS9, VHF36"

Alternatively, 160 x 50 x 8mm will fit:
ST9, VHM36", Eagle

If you use Stenner bandsaw machines, please take a look here [LINK]. Both pressure guide options are available from stock and quantity discounts are available - contact the tooling sales team for further details.

Call 01543 378805 or email sales@gerrymet.com.
Solid Formed H L Bollinders

Solid Formed H L Bollinders

Here is some new tooling now available from Gerrymet.

We are now able to supply sets of bollinders at an average price of £1550.00 per set (exc. VAT).

The specification is 180 dia x Z=6 x 60 bore Tongue & Groove V One Side

These are made to order and the delivery time is usually around 5/6 working weeks.

Typically these will out-perform a Brazed Tip Set by a ratio of 4:1. This Includes run times, a better finish and longer life span of tools.

These tools can be sharpened at least three times more than a Brazed Tip Set because of the way the tool is formed. They also finish a lot better due to the accuracy of the forming process and they can achieve higher feed rates.

For example:
4 wing Tools 20 - 30 metres per minute.

6 Wing Tools 40 - 50 metres per minute.

8 Wing Tools 60 -70 metres per minute.

Optimum feed rates also depend on timber species, moisture content, suitable extraction and one or two other variables.

For further information or a detailed quotation, please contact the Gerrymet sales team on 01543 378805 or email sales@gerrymet.com
Oscillating Mortise Chisels

Oscillating Mortise Chisels

As a UK tooling supplier to the woodworking industry, Gerrymet offer a range of oscillating mortise chisels for cutting both hard and soft woods to suit all sizes of mortise.

The oscillating mortise chisels we supply are manufactured for a variety of machines including Centauro, Masterwood, Griggio, Maka and Simal.

The typical despatch time for this product is 2 working weeks from receipt of order.

When placing an order, we would need the following details:

S = Width of mortise
L = Length of mortise
D = Depth of mortise/Chisel cut length
O/A = Overall length of chisel

Air holes can be included if required.

On receipt of this information, we would then provide a detailed quotation accordingly.

If you work in the UK woodworking industry and need a reliable tooling and saw blades supplier, contact us via the Gerrymet website or call 01543 378 805. We'll be happy to help.

Tool/Profile Re-Sharpening Service

Another service Gerrymet offer to support our manufacturing is the re-sharpening of your tooling products. We offer a regrind service for all profiles, including standard Whitehill cutters and limiters.

We aim to return your re-sharpening products within a week. We generally deliver, if you're within a 50 mile radius of our Walsall UK site, by using our own transport.

Should you have any questions about Gerrymet's re-sharpening service, please refer to our website by visiting the Servicing area of our website or by calling our office on 01543 378805.
New CNC Router Tool

New CNC Router Tool

Gerrymet are now able to supply a new tool for CNC router users.

It takes both standard and bespoke Euro cutters.

The tool specification is 40mm dia x 25mm shank x 110mm overall length and the price is £150.00 nett.

It is suitable for machining all types of material including MDF, Softwood and Hardwood.

If this is of interest to you and you would like more information, please contact our sales team on 01543 378805.

How can more be less? An interesting question

In industry, and especially in our field of saw sharpening, the above applies to numerous applications but one in particular is the sharpening of Panel Sizing sets.

Below is an example of what we have achieved.

Customer: Furniture manufacturer M.F.C (Melamine Faced Chipboard) material.

Application: Altendorf Panel Saw.

Blade Size: 300 x 96 teeth x 30 bore x 3.2 kerf Main Saw + 120 x 24 teeth x 20 bore x 3.1/4.3 Scorer.

Quantity of sets serviced: Average of 6 sets per week by another sharpening company @ £10.00 per set making a total cost of £60.00 per week

Having had some dialogue with this potential customer, we believed we could offer a more cost effective solution for the sharpening of Panel Saws and so we proceeded to sharpen their existing sets for a period of 6 weeks.

They averaged 4 sets per week @ £12.00 per set making a total cost of £48.00 per week

So there you have it - more can be less. Furthermore, this particular client now needs fewer sets in the system resulting in further savings.

At Gerrymet, we endeavour to give our customers the best and most cost effective tooling solutions. This is achieved by the continued investment in people and technology.

If this is of interest to you, please do not hesitate to contact our sales team on 01543 378805 to discuss your requirements.

To stellite tip or not to stellite tip?

With a large proportion of U.K. saw millers already using stellite tipped wide bandsaw blades, most sawyers / mill operators should, if they have not already done so, be considering the advantages to be gained by using stellite tipped blades.

Stellite is a wear resistant material composed of 60% cobalt, 29% chrome, 10% tungsten & 1% carbon and has a hardness of 47-51 HRC. This compares with a swage set hardness of 41-43 HRC and a tungsten carbide hardness of 67-82 HRC.

From these figures it's clear that stellite has a relatively high hardness factor but isn't as brittle as tungsten carbide. It has traditionally proved to be ideally suited for cutting timbers that rapidly wear down the cutting edges of swage set blades.

The extra durability of stellite enables the blades to be run for longer periods between sharpening, in certain instances 16+ hours have regularly been achieved, although this is very dependent upon the condition of the headrig/machine. Therefore it is necessary for saw millers to experiment and instigate a planned saw blade change/maintenance policy.

Generally, stellite can be run for twice the time of a swage set blade, with the obvious cost savings in downtime and resharpening, although it should be noted that blades need re-tipping every 6-12 sharpenings, dependent upon the maximum/minimum cutting kerf needed to maintain a consistent accuracy of cut.

From research carried out, mainly in the U.S.A., it has been established that a swage set blade can be using 15% more power after 4 hours use, whilst a stellite tipped blade, at the same point, will only use 1.5% more energy than when first mounted after sharpening.

We have noted from our own experience;A stellite tipped blade can be ground/sharpened to higher tolerances. Therefore a stellite tipped blade produces a smoother board finish than that of a swage set blade.The cutting kerf of a stellite tipped blade can, if necessary, be maintained consistently smaller than that of a swage set blade. Therefore less timber is lost to saw dust.
Since the amount of metal removed from the width of the blade, during re-sharpening of a stellite tipped blade, is less than that of a swage set blade fewer new blades need to be purchased per year.

In summary:

- Reduced downtime.
- Reduced energy costs.
- Better quality of cut.
- Increased yield.
- Longer sawblade life.

Stellite is the registered trade mark of the Deloro Stellite Company.

Types/Brand of Cutter

At Gerrymet, our most popular profiled cutter and limiter is the Serrated type, which we feel are the most user friendly when using limiters. Once profiled, there is generally no need to sharpen the limiter as the cutters can be moved forward with the serrated pitches in the cutterhead.

The Euro type blanks can be profiled as 'specials'. Generally, we supply standards, nos. 001 to 177, which are our popular items and are all 40mm wide. We also supply nos. 001 to 089 in a 50mm range of cutters and limiters.

Whitehill cutters and limiters are another popuar product that we at Gerrymet produce. We mainly produce 'specials' for these cutterheads and we can sharpen these items but due to the nature of the fixing system/pins, we're required to sharpen the cutter and limiter so they're calibrated to the correct height difference. They are serviced as new.

Although not our most popular choice, solid carbide inserts are another product that we can manufacture. We generally stock blanks to accomodate cutterheads that we have supplied. Gerrymet can also supply all other types including: Oertli, Whitehill, Garniga, Stehle, Leuco, Unimerco, Omas and many more. On receipt of a sample knife, Gerrymet can confirm price and availability.

Multico scribe/tenon cutters are not in as much demand as they once were but we do stock blanks for profiling or for square shoulder tenoning.

Armadillo cutters are the only method of profiling with a pair of HSS CUTTERS ONLY! This system, we believe, is mainly aimed at short run/bespoke profiles. It is becoming a very popular method of moulding and Gerrymet are more than happy to show a demonstration of this system.

Should you require any more information about the services that we offer, then please either consult our website page Bespoke Profiling Service or call the team at Gerrymet on +44 (01543) 378805

Coating Technology

We, at Gerrymet, are always trying to improve our services and tooling products. One method of doing that has been via coating technology.

We have been involved in the Research & Development of coating particular products (Profile Cutters for example) - which makes our tooling products a lot stronger and more durable.

The use of coating technology has particularly enhanced our H.S.S. (High Speed Steel) products, giving them the characteristics of T.C.T. (Tungsten Carbide Tipped) tools. As a rule of thumb, it costs approximately half the price of T.C.T. and takes half the profiling time.

As a result, Gerrymet's use of coating technology has been very beneficial to some of our customers who use particular applications. The result is that they've LOWERED COSTS.

For any questions about this service, please call us on 01543 378805.

Cutter Profiling

As you may well know, Gerrymet supply tooling products such as saw blades, band saws, circular saws, chisels and bits - basically a wide range of both wood and metal cutting tools that are highly durable and competitively priced.

We also offer manufacturing services such as cutter profiling. Whether it's Serrated, Euro, Whitehill, Multico, or Solid Carbide Blanks, you can read below to find out more about our cutter profiling service or click the webpage here - Bespoke Profiling Service.

We have a large stock holding of all the above blanks and on receipt of a drawing or timber sample Gerrymet will produce an accurate internal CAD drawing which can be sent to the client for approval.

Whether it is profiles or scribe cutters, we ensure that we manufacture these items correctly. One of the main roles of the Gerrymet sales team is to make sure the factory has all the correct information for producing accurate profiles/scribe cutters and limiters where necessary.

We have seen an increase in the demand for profiling and template making for some of the larger sawmills over the last couple of years.

Why? Time is the biggest factor. We have a manufacturing method that involves C.N.C Profiling machines and automatic template making, making Gerrymet competitive and efficient. Another reason is that we generally offer 2/3 days from order to delivery.

If you want more information about Gerrymet's cutter profiling service, please click on the link above or call us on (01543) 378 805.

Welcome to our blog page

In the next few weeks, Gerrymet, the supplier of circular saw blades, bandsaw blades and other DIY and professional tooling for woodwork, will be posting a monthly blog here on the website.

This is part of the campaign to broaden the Gerrymet brand across all areas of the internet.

The past few months have seen the circular saw blades supplier open Facebook, Google+, Twitter, YouTube, Tumblr and Blogger pages, all with the aim of expanding the word that Gerrymet supply woodworking tools at very competitive prices that are suitable for woodworking professionals and also DIY enthusiasts.

If you use the above social media websites, please follow or friend Gerrymet and keep up to date with new offers on their DIY and professional tooling products. We promise to follow you back!

The Gerrymet website blog will be updated with company news and details on their wide range of products such as knives and irons, spindle tooling and, as mentioned above, bandsaw blades and circular saw blades, or if you want to speak to Gerrymet about your tooling needs, please call the team on 01543 378805.